You are here: Home > Accessories > Marmox Fixing Dowels

Marmox Fixing Dowels

A fast and secure method for fixing Marmox boards to either brick, concrete or block walls (but not AAC lightweight blocks). Can be used on their own to fix flush to the wall or for uneven walls they are used with tile adhesive using the dot and dab method. Note: If using with a dab of adhesive then it should be noted that up to an additional 10mm will be added to the overall thickness.

Two thickness are available; 90mm and 60mm both of which are supplied in boxes of 200.

 

Technical Properties

Pull out performance for various base materials

Concrete: 0.80kN          Brick: 0.75kN          HD Block: 0.45kN

Shear Loading

Maximum recommended shear load per fixing is 0.15kN

Application Temperature = -30^oC to +90^oC

All materials used for the fixing body and expansion pin are fully resistant to corrosion.

 

A minimum 30 mm embedment depth into the wall is recommended

If using with a dab of adhesive then it should be noted that up to an additional 10mm will be added to the overall thickness.  

Back to Accessories

Advantages

Cut down on installation time and costs

Applications

For fixing Marmox boards to brick, concrete and high density blocks